Datasheet ADC8x add-on
Datasheet ADC8x add-on
Overview
The HiFiBerry ADC8x is a high-resolution 8-channel analog-to-digital converter for the Raspberry Pi 5 and the DAC8x. This is a special sound card for the Raspberry Pi, optimised for one specific use case: affordable high-quality audio recording. It can only be used as an add-on to the DAC8x, not as a standalone sound card.
Facts
- 8 channel input
- Four dedicated 192kHz/24bit high-quality Burr-Brown ADCs
- Connects directly to the DAC8x, no additional cables needed
- No soldering, comes as a pre-fabricated kit. You just plug it onto the DAC8x
- Compatible with all Raspberry Pi 5 and the DAC8x
- Directly powered from the Raspberry Pi, no additional power supply
- Two ultra-low-noise linear voltage regulators for optimal audio performance
- Comes with all components required to mount it.
Input connectors
Specifications
| Maximum input voltage | 2.1Vrms | |
| ADC signal-to-noise ratio | 110db | typical |
| ADC THD+N | -85db | typical |
| Frequency response | 10Hz-70kHz | -3dB |
| Power consumption | <0.3W | |
| Sample rates | 44.1-192kHz |
Configuration
Overlay for config.txt:dtoverlay=hifiberry-dac8x
Media
